English
français
Deutsch
español
العربية
中文
Based on the principle of voltage source inverter, YTPQC-ASVG Active Static Var Generator uses insulated gate bipolar transistor (IGBT) to control the magnitude and phase of inverter AC voltage, so as to achieve the purpose of reactive power, harmonic and imbalance compensation. Because the switching frequency of IGBT is very high (up to 25.6kHz), ASVG can compensate rapid reactive loads and achieve quite high compensation accuracy. ASVG have the best cost performance with the function of reactive power and harmonics control.
Item NO.:
YTPQC-ASVGOrder(MOQ):
1Payment:
T/T,LCMarket Price:
$1500Product Origin:
SHANGHAI,CHINAColor:
RAL7035,BlackLead Time：
7 DaysWeight：
50kgYT-PQC-ASVG Active Static Var Generator
YTPQC-ASVG Active Static Var Generator (ASVG) detects load current in real time through internal and external CT and analyzes the reactive current of load by TI DSP and FPGA, then generates PWM signal to IGBT inverter(3 Level) to generate inductive or capacitive current and compensate reactive current to realize the target power factor. YTPQC-ASVG can also compensate phase imbalance and harmonics.
Compared with the traditional capacitor bank, YTPQC Active Static Var Generator has the advantages of fast response and high compensation accuracy without under-compensation or over-compensation problems, avoid resonance, etc.
Modular Design
YTPQC series Active Static Var Generator has a advanced modular design. Usually YTPQC-ASVG consists of one or several ASVG modules and an optional touched LCD Human Machine Interface. Each ASVG module is an independent and dynamic reactive power compensation system, and users can change the SVG rating by adding or removing ASVG modules.
According to the mounting type, YTPQC Active Static Var Generator can be divided into Rack Modular ASVG,Wall-mounted ASVG and free landing ASVG.
Model Description
YTPQC-ASVG Active Static Var Generator Module series cover from 10kVAr to 100kVAr, support wall mounted type, rack type, free landing modules.
| SN | Item |
Rated Capacity |
Factory Model |
Dimensions (W*D*H,MM) |
N.W. (KG) |
Packing Size (W*D*H,MM) |
G.W. (KG) |
| 1 | ASVG | 10kVAr | YTPQC-ASVG/10-4-4L-RW | 360*402*125 | 20 | 740*690*445 | 25 |
| 2 | ASVG | 15kVAr | YTPQC-ASVG/15-4-4L-RW | 360*402*125 | 20 | 740*690*445 | 25 |
| 3 | ASVG | 30kVAr | YTPQC-ASVG/30-4-4L-RW | 505*550*190 | 34 | 740*690*445 | 40 |
| 4 | ASVG | 50kVAr | YTPQC-ASVG/50-4-4L-RW | 505*550*190 | 35 | 740*690*445 | 41 |
| 5 | ASVG | 75kVAr | YTPQC-ASVG/75-4-4L-RW | 505*570*280 | 53 | 740*690*445 | 63 |
| 6 | ASVG | 85kVAr | YTPQC-ASVG/85-4-4L-RW | 505*570*280 | 54 | 740*690*445 | 64 |
| 7 | ASVG | 100kVAr | YTPQC-ASVG/100-4-4L-RW | 505*570*280 | 55 | 740*690*445 | 65 |
YTPQC-ASVG Active Static Var Generators are high performance, compact, flexible, modular and cost-effective Active Power Factor Correction systems that provide an instantaneous and effective response to power quality problems in low or high voltage electric power systems.
Connected in parallel with the load to be compensated, YTPQC Active Static Var Generator units act as a controlled current source, providing a current waveform in real time.
|
|
 |
| Leading Technology |
Optimal Power Factor Correction |
|
|
 |
 |
| Advanced Networks Performance |
High Quality Assurance |
|
|
YTPQC Active Static Var Generator ASVG enable longer equipment lifetime, higher process reliability, improved power system capacity and stability, and reduced energy losses, complying with most demanding power quality standards and grid codes.
YTPQC Active Static Var Generator is available in a wide range of ratings, to serve a wide range of consumer applications. Its modular design allows flexibility in installation and integration. The inherent energy-efficient design,3 level topology, and the optional user-friendly Human Machine Interface, make YTPQC-ASVG a highly preferred solution for all segments of electricity consumers, system integrators and OEM manufacture.
 |
 |
| Technical Data and Specifications | ||||
| Rated Voltage | 220V (171~269V) |
400V (300~456V) |
480V (356~515V) |
690V (483~793V) |
| Rated Current |
10/20/30/40/50kVAr |
30/50/75/100kVAr |
30/50/75/100kVAr |
150/175/200kVAr |
| Mains Frequency | 50/60Hz±5% | |||
| Circuit Topology | Three Level | |||
| Multi Compensation Mode | Reactive compensation, Harmonics Mitigation, 3 phase load unbalance compensation | |||
| Filter range | 2nd~25th order harmonics,Max 60% of rated capacity(Selective or Full compensation) | |||
| Rated of Harmonic Reduction | ≥97% (For typical harmonic order distortions) | |||
| Filtering Performance | Typically, THDi≤ 5% at rated load(Even with most complex loads). | |||
| Target Power Factor | Adjustable from -1.0 to +1.0 | |||
| Neatral Filtering Capacity |
3 times the rated filter current(in case of 4 wire device) |
|||
| 3 Phase Load Balancing Effect | ≤5%, Mitigate negative and zero sequence | |||
| Switching/control frequency | 25.6kHz | |||
| Initial response time | ≤50us | |||
| Overall Response time | ≤5ms | |||
| Active loss of system | ≤2.5% | |||
| Output current limit | Automatically limited within 100% of rated capacity to output | |||
| Control algorithm | Intelligent FFT,Self-adaptive control algorithm | |||
| Controller | DSP+FPGA | |||
| Protection | Hardware protection, Software protection | |||
| Control connection | Fiber or electrical connection | |||
| Human Machine Interface | 7 inch touched TFT LCD HMI | |||
| Communication protocols | Adopt Modbus remote communication protocol; communication interface adopts RS485 and CAN bus, supporting mobile phone APP operation. | |||
| Noise | <60db (<45db during low-speed operation) | |||
| Installation method | Module embedded(Rack),wall mounted, free landing | |||
| Level of protection | IP20 | |||
| Cooling method | Speed regulation intelligent air cooling PWM Fans | |||
| Color | RAL 7035 Light Grey | |||
| Ambient temperature | -20~55℃ | |||
| Relative humidity | Maximum 95%, without condensation | |||
| Mounting height above sea level | ≤2000 at rated capacity; appropriately reduce the capacity if it is > 2000(1% derating per 100m) | |||
| Qaulifications | CE, IEEE61000,Type Test Report | |||
| Compliance with Standards | IEEE 519, ERG5/4 | |||
 |
 |
YTPQC-ASVG in Automotive Industry
YTPQC-ASVG Advanced Static Var Generator system,A Power Factor Correction Unit and Harmonic Filter in One. The Advanced Static Var Generator provides the same dynamic performance as the SVG with the added benefit of combining harmonic mitigation.
The Industry
Traditional four automotive manufacturing process, although different manufacturers technology and process has a certain degree of differences, but in recent years with automation transformation, such as high-end CNC punch of flexible automatic production line, coating robots, welding robots, lifting robot industrial robots put into use.Automation equipment not only improves work efficiency and reduces the degree of labor, but also produces a series of problems.
The Problem
Automotive manufacturing industry is a typical heavy industry industry, with its electricity demand, large power demand, low power factor of power equipment, many typical non-linear load and impact load equipment, and high power quality requirements.
Automobile manufacturing industry is a typical heavy industry industry, its load is large, and there are a large number of impact load, resulting in rapid load change, so that the traditional capacitors reactive power compensation can not keep up with the change of load.
The Solution
For the fast change of loads, we configure the corresponding Static Var Generator to realize best power factor compensation. We installed 300kVAr SVG Static Var Generator at site, maintain Power Factor at 1.00 real time.
The Technical Performance
 |
 |
The Benefits
After installed YT Static Var Generator, the site data compliance with IEEE 519, G5/4, EN 50160 and also other power quality standards and recommendations:
Installed Countries
IPv6 network supported
