Introduction To Capacitors And Reactors Reactance includes inductive reactance and capacitive reactance, and reactor includes inductive reactance (inductor) and capacitive reactance (capacitor). Inductance has the function of "blocking AC and blocking DC", that is, in the AC circuit, the characteristics of inductive reactance are used to "pass low-frequency DC and block high-frequency AC". The cap...
YT Electric TTU reactive power compensation project This is a reactive power compensation project of the distribution station in the community with TTU (Distribution Transformer supervisory Terminal Unit) function completed by Yingtong electric. In the power supply and distribution system, the distribution transformer monitoring terminal (TTU) is used to collect and control the information of the ...
SVG Compensation YTPQC-SVG Static VAR Generator, IGBT switching compensation systems consist of high technology IGBT drivers and modules. SVG can perform both inductive reactive and capacitive reactive compensation in both directions. YTPQC-SVG compensation systems are designed for facilities with fast load change, where the reactive power limit is very important, and thanks to high speed and sens...
YTPQC-SVG Static Var GENERATOR Static Var Generator SVG works as a dynamic reactive power source, adopts high-speed computation components like DSP/IGBT, combining with super precise control program, following the grid current variation in real time, improving Power Factor value to 0.99 within 5ms. SVG represents the latest generation technology in the power factor correction field. By elimi...
The Active Harmonic Filter AHF unit is an electronic measuring instrument used in natural science-related engineering and technical fields. During the spurious emission process of communication equipment, the wireless communication signals in the GSM, GSMR and CDMA frequency bands are filtered, which generally consists of capacitors, resistors and inductors. During the operation of the AHF Harmoni...
The inductor is a component that can convert electrical energy into magnetic energy and store it. The structure of the inductor is similar to that of a transformer, but there is only one winding, which only hinders the change of current. If the inductor is in the state of no current passing through, when the circuit is connected It will try to hinder the flow of current through it. If the inductor...
Power Factor Correction Power Factor Correction improves the phase angle between the supply voltage and current while the real power consumption in watts remains the same, because as we have seen a pure reactance does not consume any real power. Adding an impedance in the form of capacitve reactance in parallel with the coil above will decrease Θ and thus increases the power f...
Electricity is a big part of our day, powering all the tech we use. There are two main types of electricity users, or "loads," called linear and non-linear. This just means they use electricity from the power supply in different ways. This distinction affects everything from power efficiency to the longevity of devices. Categories of Electrical Loads: · Inductive Loads: Characterized b...