The History Of Reactive Power Compensation If you are in the power industry, you must have heard of reactive power compensation. But you may not know much about it. What is reactive power compensation? We know that the power output of the power grid includes two parts: first, active power: directly consume electric energy, convert electric energy into mechanical energy, thermal energy,...
YT Electric single-phase active harmonic filter(AHF) is improved and upgraded on the basis of three-phase equipment. The A/B/C (L1/L2/L3) three-phase output is the same to achieve the purpose of single-phase compensation. Features of Single-phase AHF The device has a variety of compensation modes: reactive power compensation, harmonics current mitigation, which can be compensat...
Power Quality Problems The automobile manufacturing industry is a typical heavy industrial industry, and its electricity demand has many characteristics, such as large electric energy demand, low power factor of electrical equipment, many typical nonlinear loads and impact load equipment, and high power quality requirements. Hazards and Influence In the traditional four major automobil...
Gelinmei (Wuxi) Energy Materials Co., Ltd. is a company that develops and produces lithium cobaltate and ternary materials. In the process of material production, some equipment (such as atmosphere furnace, air compressor, water chiller, etc.) will generate a large number of harmonics when working, which will do great harm to the whole power grid system. According to on-site data analysis and user...
Power Quality Problems Residential community power grids are low-voltage power distribution networks, generally connected to large power grids by 10/0.4kV transformers. Most of the loads in the grid work at three-phase 480V and single-phase 220V voltage levels, mainly small-capacity loads, such as air conditioners, refrigerators, and televisions. Machines and other household appliances. Most house...
Power Quality Problem The target enterprise produces shampoo, hair conditioner, moisturizing products, skin care products, liquid detergent, sanitary napkin, plastic molding products, cosmetics, washing powder, soap, etc. because the factory has more frequency conversion equipment, the harmonic current is large, and the voltage distortion rate is high, which endangers production safety and needs t...
Power Factor PF Measurement The control unit calculates: The power factor per phase PFL1, PFL2, PFL3, from the phase active and apparent powers. The total power factor PF from the total active power Ptotal and the total apparent power Stotal: PF = Ptotal / Stotal NOTE: Stot is the vector or arithmetic total apparent power, depending on the setting. This indicator qualifies:...
Power cabinet The complete power distribution device is a complete set of devices supplied by the manufacturer. According to the requirements of the main wiring, the manufacturer assembles the electrical equipment of each circuit, including control appliances, protection appliances, measuring appliances (such as circuit breakers, disconnectors, mutual inductors, etc.), bus bars, current carrying c...