What is the power factor correction? Power factor correction (PFC) is a technique used to improve the power factor of an electrical system. Power factor is a measure of how effectively electrical power is being used. It is defined as the ratio of real power (measured in kilowatts, kW) used to perform work to the apparent power (measured in kilovolt-amperes, kVA) drawn from the power source. Power ...
What is harmonic and how to manage it? Harmonics denote electrical quantities that possess frequencies which are integer multiples of the fundamental wave present in the current. This concept typically involves the Fourier series decomposition of periodic, non-sinusoidal electrical quantities. In this context, any electrical quantity with a frequency exceeding that of the fundamental wave, derived...
Introduction to our 150A AHF module A 150A Active Harmonic Filter (AHF) module is a specific type of AHF designed to handle and compensate power quality up to 150 amperes. This module is used to improve power quality by reducing harmonic distortion,compensation reactive power and unbalance in electrical systems. Here’s a detailed overview of its installations, features, working principles, a...
What is the active power compensator? Active Power Compensator (APC) is an advanced power electronic device used to manage and optimize the flow of active power in electrical power systems. It helps to enhance power quality, improve voltage stability, and increase the overall efficiency of the power distribution network. APCs are particularly useful in applications where there are significant fluc...
How SVG compensation for leading reactive power? What kind of load is prone to generating leading power reactive power? Leading power factor conditions typically occur when a system has capacitive loads or a surplus of capacitive reactance over inductive reactance. Capacitive loads store energy in an electric field, unlike inductive loads that store energy in a magnetic field. When these lo...
kVAr and Amps in power quality Reactive Power (kVAR) Reactive power, measured in kilovolt-amperes reactive (kVAR), is the component of alternating current (AC) power that does not perform any actual work but is necessary for maintaining the voltage levels required for the active (real) power to do useful work. It is associated with the energy storage in inductive and capacitive elements of the pow...
Reasons of Neutral Current The neutral current is the current flowing through the neutral conductor in a multi-phase electrical system. In a perfectly balanced system, the sum of the currents in all phases should theoretically cancel each other out, resulting in zero neutral current. However, in practice, various factors cause current to flow in the neutral conductor. Reasons for Neutral Cur...
Neutral Current and Single-Phase Loads Neutral current is an essential aspect to consider in electrical systems, especially when dealing with single-phase loads in a three-phase system. The presence of single-phase loads can lead to various issues related to N line current, impacting the overall power quality and safety of the system. Understanding N line Current in Systems with Single-Phase Loads...
English
français
Deutsch
español
العربية
中文
IPv6 network supported
