Background Jiangyin Huaxin Steel Cable Co., Ltd. produces thick zinc-coated prestressed steel wire, stranded wire and other steel wire, bar steel, steel wire metal products and stainless steel sheet materials. Power Quality Problem In the production process, the harmonic content of the power grid is relatively large, the power quality is poor, and the original reactive power compensation eq...
In modern industrial processes, the number of nonlinear loads - known to be a major source of current harmonics - is constantly growing. At the same time, the number of reactive-power compensators operating in these networks is growing too. Though the compensators are not the source of harmonic distortions, they may cause high amplifications of harmonics by creating resonance conditions. This can ...
Power Quality Problems With the in-depth application of power electronic technology, the automation of the petrochemical industry has been continuously improved, and the nature of the load has also undergone qualitative changes. The increase of nonlinear and impact loads has brought about voltage flicker, three-phase imbalance, and excessive reactive power consumption. , harmonics and a series of ...
Background The input terminals of switching power supply and ups of Chinatelecom cloud computing Guizhou Information Park data center generate harmonic current, and the final harmonic current is collected on the general busbar. A large amount of harmonic current will cause the following harm to the communication room. Harmonic current will interfere with the communication signals of adjacent condu...
YTPQC-AHF Active Harmonic Filter YTPQC-AHF Active Harmonic Filter is a perfect and comprehensive solution to the power quality issues of power grid, such as harmonics, reactive power and 3 phase load unbalance. YTPQC-AHF which is in parallel to power grid can detect the harmonic wave in power grid in time, generate the reverse-phase compensation current through the converter and dynamica...
Power Factor PF Measurement The control unit calculates: The power factor per phase PFL1, PFL2, PFL3, from the phase active and apparent powers. The total power factor PF from the total active power Ptotal and the total apparent power Stotal: PF = Ptotal / Stotal NOTE: Stot is the vector or arithmetic total apparent power, depending on the setting. This indicator qualifies:...
Introduction To Capacitors And Reactors Reactance includes inductive reactance and capacitive reactance, and reactor includes inductive reactance (inductor) and capacitive reactance (capacitor). Inductance has the function of "blocking AC and blocking DC", that is, in the AC circuit, the characteristics of inductive reactance are used to "pass low-frequency DC and block high-frequency AC". The cap...
The existing power grid is usually equipped with a large number of nonlinear electronic components. These nonlinear electronic components will generate corresponding harmonics during the working process, among which high-order harmonics will interfere with the electrical equipment in the power grid and seriously affect the power supply. Power quality in the grid. In order to reduce the adverse eff...