YT ELECTRIC has been offering a comprehensive range of key components for Automatic Power factor correction (APFC) and power quality solutions for many years. The rapid development of industry and infrastructure resulted in the increased usage of power electronic loads which demands a highly dynamic response time for reactive power compensation. Conventional reactive power compensation only with p...
YTPQC-AHF Active Power Filter has been operating safely and stably in France YTPQC-AHF Active Power Harmonic Filter is an advanced power quality control equipment, which can compensate reactive power ,harmonics current and imbalance by setting parameters from friendly Human Machine Interface.This time French client purchased our Active Harmonic Filters mainly to improve Power Factor and mitigate h...
SMT mounter SMT (Surface Mount Technology) is an electronic component installation technology used to attach electronic components (such as resistors, capacitors, integrated circuits, etc.) to printed circuit boards (PCBs). Compared to traditional plug-in technology, SMT patches have higher density, faster production speed, and lower production costs. The working principle of SMT patches is...
YTPQC-AHF Active Harmonic Filter Based on the broad knowledge and experience in terms of solutions and applications in power quality, YT ELECTRIC has developed YTPQC-AHF Active Harmonic Filters. YTPQC Active Harmonic Filter is an active power correction solution to help stabilize electrical networks by providing harmonic mitigation and power factor correction, and load balancing. It is speci...
SVG (Static Var Generator) and conventional capacitor bank are both devices used in power systems for reactive power compensation, but they have significant differences in terms of operation, performance, and flexibility. Here's a comparison between SVG and conventional capacitor bank: 1. Operation: - SVG: SVG uses power electronics-based technology to dynamically control and r...
The reactive power consumed by the transformer is generally about 10% to 15% of its rated capacity, and its no-load reactive power is about 1/3 of the full load. Therefore, in order to improve power factor (PF) of the power system, the transformer should not operate at no-load or in a long-term low-load operation state. Vigorously improving the power factor of transformers, reducing line losses, a...
Low voltage automatic contactor switched capacitor banks or filter banks typically use a delay time of 30 – 40 seconds between steps. This delay time is chosen to ensure that the capacitors have discharged prior to being re-connected. The long delay time limits the autobank’s ability to track rapidly changing loads. The slow response time may result in an overload condition in filter b...
Hybrid power factor correction Hybrid Active power factor correction systems utilise power electronics and digital control to achieve active reactive current compensation for specific and high performance solutions. YTPQC hybrid power factor correction system is comprised from both capacitor based and Static Var Generator(SVG,Active Power Factor correction). Static Var Generator is use...
English
français
Deutsch
español
العربية
中文
IPv6 network supported
