Prehistoric era -PT PT is the earliest generation of IGBT. It uses heavily doped P+substrate as the starting layer, on which N+buffer and N-base epitaxy are successively grown, and finally the cellular structure is formed on the surface of the epitaxy layer. It is named because the electric field runs through the entire N-base region at the cut-off time. Its process is complex, its cost is h...
Power Factor Correction and Reactive Power Compensation Power Factor Correction(PFC) is done by electricity consumers to avoid penalties on account of large KVA demand or lower power factor. Normally, such penalties are imposed on industrial consumers. Therefore, industries need more lagging KVAr due to induction motors or otherwise, install capacitors banks or Static Var Generator(SVG) for power ...
Variable Speed Drives (VSDs) Do you have AC motors in your facility?Do these motors need a variable output? The growing popularity of Variable Speed Drives (VSDs) is a key driver of energy efficiency, but Variable Speed Drives cause power quality problems, one of which is the harmonics within power systems. So networks requires more effective means to mitigate harmonics. In C...
Over its 100-year history, welding has become one of the most essential technical skills in manufacturing and fabrication. The process of using high-temperature, electrical-powered heat to fuse two pieces of metal or synthetic material has been incorporated throughout the industry in an increasingly wide variety of applications that rely on a range of tools and techniques. But Electrical welding m...
Does Active Harmonic Filter can saving energy? YTPQC-AHF Active Harmonic Filter can save energy by reducing the amount of harmonic distortion in a power system. Harmonic distortion can cause power losses and reduce the efficiency of electrical equipment, so reducing it can help to save energy. How does active harmonic filter save energy？ YTPQC-AHF Active Harmonic filters can save energy by ...
Site conditions The site is located in Hangzhou Asian Games Village.The project has more than 20 power distribution rooms. Due to the main load being fire-fighting facilities, which are generally not started, the transformers almost all operate without load, and the cable length is long, resulting in capacitive reactive power at both the high and low voltage sides, which cannot be compensated by t...
What is difference between THD and TDD? While power electronics have created considerable energy savings, they can distort the quality of electrical power delivered through the building they serve, reducing the effectiveness and life span of the power electronics contained within that building. THD is described as the instantaneous value of the ratio of the root-mean-square (rms) of the harmonic c...
What are scenarios causing power factor displacements 1. Poorly designed electrical systems with inadequate power factor correction equipment. 2. Large inductive loads such as motors, transformers, and generators that cause lagging power factor. 3. Unbalanced three-phase loads that cause phase displacement of the current and voltage waveforms. 4. Unbalanced single-phase loads that cause current an...
English
français
Deutsch
español
العربية
中文
IPv6 network supported
