How does power quality affect motors? Understanding the significance of power quality in the context of motor and electrical equipment efficiency is crucial. Power quality is evaluated through several key parameters, including harmonics, voltage unbalance, and voltage fluctuations. In an alternating current (AC) system, the interaction between voltage potential and current through th...
Introduction The best distribution system is one that will, cost-effectively and safely, supply adequate electric service to both present and future probable loads. The function of the electric power distribution system in a building or an installation site is to receive power at one or more supply points and to deliver it to the individual lamps, motors and all other electrically operated devices...
Abstract This article explores the measurement of electric current using optical fibers, primarily through the Faraday effect, also known as the magneto-optic effect. Fiber-Optic Current Sensors (FOCS) offer high accuracy, modularity, and easy installation. They provide isolation of the measuring part from the primary technology and can measure inside transformers, including winding temperature. T...
How to eliminate harmonic components in power systems? Harmonics can significantly impact power systems, leading to transformer failures, motor burnouts, nuisance tripping of circuit breakers, and overheating of neutral conductors and other components in a power distribution network. This overheating can be severe enough to cause electrical fires. Nonlinear loads, which draw current ...
Is solar photovoltaic inverter a harmonic source? In general, the contribution of current harmonics from solar PV inverters does not pose a significant power quality issue. The current total harmonic distortion (ITHD) from a quality-brand inverter is typically low and negligible compared to harmonics-producing loads such as variable speed drives, where ITHD for a typical 6-pulse drive ranges betwe...
Introduction Power quality is a general term used to describe the compatibility between connected equipment and its electrical supply. The supply system can be affected by changes to the frequency or amplitude of the voltage, the balance between phases on a three-phase system, and distortion levels of the original signals. The characteristics that are important and what can be tolerated by the con...
Abstract Harmonic distortion in power systems is a critical challenge that electrical engineers face, especially in today's complex and technology-driven environments. The proliferation of non-linear loads—such as variable frequency drives, power electronic converters, and uninterruptible power supplies (UPS)—has led to an increase in harmonic distortions that degrade the quality of po...
How to choose a suitable current transformer? Choosing the Right Current Transformer for Your Power Measurement Project If you’re gearing up for a power measurement project, you’ve likely narrowed down your options for a power meter. Whether you’re dealing with a multi-circuit setup or require precise metering in an industrial environment, the next crucial step is s...