Stepless compensation and multi-step compensation are two different approaches used in power system compensation to mitigate the effects of reactive power and voltage fluctuations. Stepless Compensation: Stepless compensation, also known as continuous compensation, involves the use of a continuously adjustable reactive power compensator to regulate voltage and control reactive power flow. The most...
The relationship between capacitors and harmonics is very close, especially in power systems. The use of capacitors can affect the generation and propagation of harmonics, and are also easily affected by harmonics, leading to reduced performance or damage. Harmonic amplification In the power system, capacitors have a lower impedance to harmonics, so harmonic currents tend to flow through th...
Power quality refers to the characteristics of electrical power, including voltage, frequency, and waveform, that affect the operation of electrical devices. Typical products for power quality improvement include: Uninterruptible Power Supply (UPS): UPS systems provide backup power during outages and voltage sags, ensuring a continuous and stable power supply to critical loads. Voltage Regulators:...
The peak and effective value of harmonics When discussing the peak of harmonic currents, it's essential to first understand the fundamentals of harmonics. The effective value (RMS value) of a harmonic describes the average power of the harmonic component over one period, reflecting the equivalent extent to which the harmonic causes heating effects in the system. However, the peak of a harmonic (th...
The harm of harmonics to power capacitors mainly includes the following aspects 1. Overcurrent and Overload -Harmonics can cause distortion of voltage and current at the capacitor terminals, especially at specific harmonic frequencies, where capacitors resonate with inductive components in the system, resulting in significant amplification of harmonic currents. Excessive harmonic current causes th...
In Active Harmonic Filter (AHF), the function of an Insulated Gate Bipolar Transistor (IGBT) is to control the compensation currents that are generated to counteract the harmonic currents in an electrical power system. IGBTs are used as the main switching devices in AHFs due to their ability to handle high voltages and currents. Here's a step-by-step explanation of how IGBTs function in an Active ...
What is difference of Active Harmonic Filter and Active Power Filter? The principle of an Active Harmonic Filter AHF is to mitigate or eliminate harmonic distortion in electrical power systems. Harmonics are unwanted currents or voltages that deviate from the fundamental frequency of the power system. These harmonics are typically generated by nonlinear loads such as variable frequency drives, com...
In the complex and ever-changing world of electrical power distribution, the accurate detection and in-depth analysis of ultra-high harmonics are matters of supreme importance. These advanced technologies specifically tailored for ultra-high harmonic detection are the linchpins in maintaining the integrity and quality of power supply within distribution networks. Among the crucial techniques is wi...
English
français
Deutsch
español
العربية
中文
IPv6 network supported
